Global Mitra Teknindo
Stainless Steel Kitchen Equipment
Membuat berbagai macam peralatan dapur dari bahan stainless steel u/ restoran, hotel dll

Office : Jl. Raya Mauk, Km.8, (Depan Perum. Golden City). Telp. 021-59373384, Fax. 021-59373384
Show Room : City Mall Lt. GF, Jl. Moh. Thoha Km.2 No.1
Tangerang 15112 (Telp. 021-55761018)
Keranjang Belanja anda | Rp. 284,300,000
  • 1 x Exhaust Hood Island = Rp. 0
  • 1 x Gas Stock Pot Stove = Rp. 3,850,000
  • 1 x Gas Fryer Manual (Portable) = Rp. 0
  • 1 x Gas Stove 2 Burner = Rp. 4,650,000
  • 1 x Triple Gas Wok Range / Triple Kwali Range = Rp. 13,550,000
  • 1 x Gas Grill with Stand and Cross Bracing = Rp. 4,750,000
  • 1 x Exhaust Hood Wall = Rp. 3,250,000
  • 1 x Cabinet Table with 3 Drawer, 2 Swing Doors and Backsplash = Rp. 5,750,000
  • 1 x Base Cabinet With Integral Sink = Rp. 5,650,000
  • 1 x Grease Trap - Standar = Rp. 900,000
  • 1 x Flooring Grating / Gutter Grill = Rp. 1,550,000
  • 1 x Working Table Under Shelf and Double Over Shelf = Rp. 4,950,000
  • 1 x Work Table w/ 1 Grid Shelf = Rp. 3,350,000
  • 1 x Wall Shelf = Rp. 850,000
  • 2 x Dirty Dish Landing Table = Rp. 0
  • 1 x Wall Cabinet = Rp. 0
  • 1 x Heated Cabinet = Rp. 0
  • 3 x 2 Drawer Trolley = Rp. 0
  • 2 x Cart Stand - Two Drawers-01 = Rp. 0
  • 2 x Cart Stand - Two Drawers = Rp. 0
  • 2 x Food Display = Rp. 0
  • 1 x Food Pan = Rp. 0
  • 1 x Upright Display Case = Rp. 0
  • 1 x Bain Marie Counter = Rp. 0
  • 2 x Loading Trolley = Rp. 0
  • 1 x Solid - Sloted Rack = Rp. 0
  • 2 x Single Gas Wok range / Single Kwali Range = Rp. 11,500,000
  • 2 x Gas Stove 4 Burner with Cross Bracing = Rp. 15,700,000
  • 2 x Single Pot Sink with Cross Bracing = Rp. 5,100,000
  • 2 x Arch Series Cabinet = Rp. 0
  • 2 x 2 Shelf Utility Cart = Rp. 0
  • 2 x Double Sink with Side Table = Rp. 9,100,000
  • 2 x Single Sink with Side Table and Cross Bracing = Rp. 6,700,000
  • 2 x Cabinet Table with 2 Sliding Doors = Rp. 9,500,000
  • 2 x Mobile Bainmarie 3 Pan = Rp. 0
  • 2 x Gas Stove 4 Burner (With Oven) = Rp. 0
  • 4 x High Tray Trolley / Bakery Trolley 17 Tiers = Rp. 18,600,000
  • 2 x Gas Grill Portable = Rp. 8,900,000
  • 3 x Triple Sink with Cross Bracing = Rp. 17,250,000
  • 2 x Wall Hanging Cabinet = Rp. 0
  • 3 x Working Table w/ 2 Under Shelf (Without Back Splash) = Rp. 10,350,000
  • 4 x Dim Sum Trolley = Rp. 0
  • 4 x Gas Fryer Manual (Stand Alone) = Rp. 0
  • 3 x Double Sink = Rp. 10,950,000
  • 3 x Food Trolley = Rp. 0
  • 4 x Double Over Shelf = Rp. 6,600,000
  • 2 x Kitchen Set Cabinet Table with Dish Rack Drawers = Rp. 11,100,000
  • 3 x Working Table w/ 2 Under Shelf and Back Splash = Rp. 10,650,000
  • 3 x Double Gas Wok Range / Double Kwali Range = Rp. 29,250,000
  • 3 x Draw Stand Cabinet = Rp. 0
  • 3 x Dual Cabinet Cart = Rp. 0
  • 4 x Gas Stove 6 Burners = Rp. 50,000,000
Username
Pasword
 

Email: globalmitratek@gmail.com
Why is Stainless Steel Stainless?

Why is Stainless Steel Stainless?
Di input oleh : mr_pawank | Tanggal : 2010-11-02 18:39:10

  What Is Stainless Steel and Why Is it Stainless?

In 1913, English metallurgist Harry Brearly, working on a project to improve rifle barrels, accidentally discovered that adding chromium to low carbon steel gives it stain resistance. In addition to iron, carbon, and chromium, modern stainless steel may also contain other elements, such as nickel, niobium, molybdenum, and titanium. Nickel, molybdenum, niobium, and chromium enhance the corrosion resistance of stainless steel. It is the addition of a minimum of 12% chromium to the steel that makes it resist rust, or stain 'less' than other types of steel. The chromium in the steel combines with oxygen in the atmosphere to form a thin, invisible layer of chrome-containing oxide, called the passive film. The sizes of chromium atoms and their oxides are similar, so they pack neatly together on the surface of the metal, forming a stable layer only a few atoms thick. If the metal is cut or scratched and the passive film is disrupted, more oxide will quickly form and recover the exposed surface, protecting it from oxidative corrosion. (Iron, on the other hand, rusts quickly because atomic iron is much smaller than its oxide, so the oxide forms a loose rather than tightly-packed layer and flakes away.) The passive film requires oxygen to self-repair, so stainless steels have poor corrosion resistance in low-oxygen and poor circulation environments. In seawater, chlorides from the salt will attack and destroy the passive film more quickly than it can be repaired in a low oxygen environment.

 

Types of Stainless Steel

The three main types of stainless steels are austenitic, ferritic, and martensitic. These three types of steels are identified by their microstructure or predominant crystal phase.

Austenitic:
Austenitic steels have austenite as their primary phase (face centered cubic crystal). These are alloys containing chromium and nickel (sometimes manganese and nitrogen), structured around the Type 302 composition of iron, 18% chromium, and 8% nickel. Austenitic steels are not hardenable by heat treatment. The most familiar stainless steel is probably Type 304, sometimes called T304 or simply 304. Type 304 surgical stainless steel is an austenitic steel containing 18-20% chromium and 8-10% nickel.

Ferritic:
Ferritic steels have ferrite (body centered cubic crystal) as their main phase. These steels contain iron and chromium, based on the Type 430 composition of 17% chromium. Ferritic steel is less ductile than austenitic steel and is not hardenable by heat treatment.

Martensitic:
The characteristic orthorhombic martensite microstructure was first observed by German microscopist Adolf Martens around 1890. Martensitic steels are low carbon steels built around the Type 410 composition of iron, 12% chromium, and 0.12% carbon. They may be tempered and hardened. Martensite gives steel great hardness, but it also reduces its toughness and makes it brittle, so few steels are fully hardened.

There are also other grades of stainless steels, such as precipitation-hardened, duplex, and cast stainless steels. Stainless steel can be produced in a variety of finishes and textures and can be tinted over a broad spectrum of colors.

Passivation

There is some dispute over whether the corrosion resistance of stainless steel can be enhanced by the process of passivation. Essentially, passivation is the removal of free iron from the surface of the steel. This is performed by immersing the steel in an oxidant, such as nitric acid or citric acid solution. Since the top layer of iron is removed, passivation diminishes surface discoloration. While passivation does not affect the thickness or effectiveness of the passive layer, it is useful in producing a clean surface for a further treatment, such as plating or painting. On the other hand, if the oxidant is incompletely removed from the steel, as sometimes happens in pieces with tight joints or corners, then crevice corrosion may result. Most research indicates that diminishing surface particle corrosion does not reduce susceptibility to pitting corrosion.

Additional Reading

  • Citric Acid Passivation of Stainless Steel - Lee V. Kremer's article discusses the use of citric acid passivation as an alternative to nitric acid passivation of stainless steel.
  • Passivation of Stainless Steel - Dan Englebert's article defines passivation and describes how it is performed and verified.
  • Phase Diagram Glossary - These are definitions of several relevant terms, including 'ferritic steel', 'microstructure', and 'plain carbon steel'.
  • Stainless Steel Property Database - The Hendrix Group provides this database of material properties, including compositions, corrosion properties, cost data, specifications, and categories of steel.
  • The Stainless Steel Information Center - The Specialty Steel Industry of North America sponsors this resource, which includes general information about stainless steel, industry news, publications, workshops and training, and information for students.
  • What Are Martensites? - This site offers a description and pictures of the martensitic crystal transformation in steels.



Contact :

Alimin :
021-93587774, 0812 1991 7771
Sarwan :
Call/WhatsAp: 081317698478, 087776484049
Pin BB: 76052EDF



1 2 3 4 5 6
Stainless Steel Working Table
Meja Kerja dari bahan stainless steel berkwalitas, harga murah : Working Table, Over Shelf, Wall Shelf, Holed Table
Stainless Steel Sink
Stainless Steel Sink : Single sink, double sink, triple sink, pot sink, diswasher sink, single sink with butcher, grese trap, flooring grating dll.
Stainless Steel Cabinet
Stainless steel cabinet : upright cabinet, wall hanging cabinet, heated cabinet, solid - sloted rack, harga termurah, kwalitas terbaik, solusi untuk restoran dan rumah tangga.
Stainless Steel Trolley
Stainless Steel Trolley: service trolley, Flour Bin Trolley, Low tray Trolley, Dim Sum Trolley, Loading Trolley, Food Trolley, Wiremess Trolley. Harga Lokal, Kwalitas Import.
Stainless Steel Food Display
Stainless Steel Food Display: bain marie counter, Upright Display Case, food pan, display cake, menerima pembuatan dengan model dan ukuran sesuai pesanan. Dibuat dari bahan stainless berkwalitas.
Cooking Equipment
Cooking Equipment: Gas Wok range, Gas stock Pot Stove, Grill, Rice Cooker, gas range, Gas Fryer, Exhaust Hood, terbuat dari bahan stainless steel berkwalitas, harga termurah.

Link Stainless Steel